DWCT
Ultra-thin body 13mm * large detection height 540mm general ultra-thin area sensor NA2-N series
UL Recognaized CE Marking Korean S Mark
UL, CE, Korean S Mark have been obtained.
CE: EMC Instruction
UL: Recognition Certification
Korean S logo: NA2- □ -K only
characteristic
* Large detection height of 540mm (28 optical axis)
The detection height of up to 540mm (28 optical axis) is realized.The optical axis spacing is 20mm (* 30mm), and the detection distance is 5m to meet various requirements.
* Large detection height of 540mm (28 optical axis)
Clear and visible large work light
Both light projectors and light acceptors are equipped with clear and visible red work indicators at a height of 102mm.It can also be used as a large working status indicator when the detection output is directly connected to the job indicator input.
Clear and visible large work light
Only 13mm thick, slim figure
Only 13mm thick, 30mm wide, thin NA2-N series.Right with your equipment and will not interfere with work.
Only 13mm thick, slim figure
Six detection heights
In addition to the original optical axis types 12,16 and 20, the series also includes the optical axis types 8,24 and 28.A variety of models with detection height from 540mm (28 optical shaft) to 140mm (8 optical shaft).
Six detection heights
Anti-interference settings installed in parallel
The two sensors are set to different light projection frequencies to prevent mutual interference.Both sensors are used to detect in a wider area.The set frequency can be determined according to the number of illuminated light projection indicators.
Anti-interference settings installed in parallel
Convenient light stop function
The optical axis output can be stopped by entering an external signal.This is a useful test run feature when the operation is started.
