XWY
FL1.45/4.22 Air cooler
delivery time: 2-4 weeks
| 1. Brake disk (DQ004.12.10) |
| 2. Rotary seal type of “OR” (OR 3200 033 00161F) 1pcs - OR 3200 033 00161F consists of 2 parts, they are: 1 pcs О -ring и 1 pcs peace carbon fiber ring. |
| 3. Pressure reducing valve (RVCA-LAN) |
| 4. Unloader valve (QPAB-LAN) |
| 5. Explosion Proof Solenoid Valve (DHA-0713/PA-M/7 24DC) |
| 6. Piston pump (A10V028DR/31R-PSC12K01) |
| 7. Piston seal type of “OK” (OK 0190 00701) |
| 8. Piston seal type of “OK” (OK 0200 00701) |
| 9. Hydraulic seal / Piston guide type of “FR” (FR J060 Q5029) |
| 10. Coupling (DQ004.07.01.09) 1 pcs DQ004.07.01.09 consists of 2 pcs half-coupling and 1 pc rubber clutch. |
| 11. Piston accumulator (HXQ-L10/20-H) |
| 12. Oil seal with 2 lugs (GTC002100) dimensions 210×240×15 |
| 13. Teflon gland packing (GY7540-12) |
| 14. Teflon gland packing (GY7540-18) |
| 15. Oil seal with 2 lugs (R01-FG) dimensions 255х299х20. |
| 16. Air cooler (FL1.45/4.22) |
| 17. Internal IBOP with automatic control (DQ001.02.03) |
| 18. Internal IBOP with manual control (DQ001.02.02) |
| 19. Holding key housing (DQ004.01.20) |
| 20. Bearing (roller) dimensions; 190×290×46 (NU1038M/C4) |
| 21. Oil seal with 2 lugs (R01-FG) dimensions 200×230×15 |
| 22. Tapered bearing (32044/YB2) dimensions 220×340×76 |
| 23. Bearing (T1120) dimensions; 279. 400х603.250х136.525 |
| 24. Oil seal with 2 lugss (R01-FG) dimensions 240х270х15 |
| 25. Bearing (roller) dimensions; 220х400х65 (NU244-E-M1-C3) |
| 26. Upper bearing (ball) dimensions: 320х440х56 (61964) |
| 27. Middle bearing NA 4860 (roller) (GB/T5801-1994) (dimensions 300х380х80) |
| 28. Bearing (conical) dimensions; 220х420х122 (29444) |
| 29. Oil seal with 2 lugs (R01-FG) dimensions; 360х400х20 |
| 30. Taper Lock Rotor (JB/T7934-1999). (1 set consists of; wedges with rims (2 pcs) и 24 pcs hex bolts) |
| 31. Friction sleeve (DQ004.12.17) |
| 32. Friction sleeve (DQ004.12.03) |
| 33. Bearing nut (DQ004.12.27) |
