DWCT
Specifications detailed
contents of a project
Order product No. CX-444-Z
Model CX-444-Z
The CE indicates the applicable instruction, the EMC instruction, the RoHS instruction
The set distance range is 20~100mm
(Note): Distance setting range refers to the detection distance range that can be set by the distance setting regulator.The tested objects can be detected from 15mm wards.
Detection distance (white dull paper) is 15~100mm
Poor (lag) below 2% of movement distance (white dull paper)
Repeat accuracy along the detection axis: below 1mm, perpendicular to the detection axis: below 0.2mm (using white dull paper)
Power supply voltage 12~24V DC ± 10% pulse P-P below 10%
Consumption current is below 20mA
Output an NPN open-circuit collector transistor
Inflow current: 100mA
External voltage: below 30V DC (between output-0V)
Remaining voltage: below 2V (when inflow current is 100mA) and below 1V (when inflow current is 16mA)
Output: the output action can be selected when detection ON / non-detection ON
Output: short-circuit protection equipment
The reaction time was below 1ms
Operating status indicator orange LED (lit when output ON)
Stability indicator lamp green LED (come on during stability action)
The distance setting regulator is equipped with a mechanical 5-loop regulator
Detection mode Use the detection mode switching input to select the BGS / FGS function
Automatic anti-interference function is equipped with
(Note): Sometimes the detection is unstable due to the setting state and the detection object.After setting up this product, please must confirm through the actual test.
Environmental resistance: protective structure IP67 (IEC), anti-immersion type
Environmental resistance: use ambient temperature-25~ + 55℃ (note non-condensation, icing), when storage: -30~ + 70℃
Environmental resistance: use the ambient humidity of 35~85%RH, and the storage time: 35~85%RH
Environmental resistance: Use environmental illumination incandescent lamp: light surface illumination below 3,000lx
Environmental resistance: voltage resistance AC1,000V 1 minute between all power connection terminals and housing
Environmental resistance: insulation resistance between all power supply connection terminals and housing, above 20M, DC250V-based high resistance meter
Environmental resistance: vibration resistance frequency 10~500Hz double amplitude 3mm(MAX.50G) XYZ for 2 hours
Environmental resistance: impact resistance frequency 500 m/s2 (about 50G) XYZ 3 times in each direction
Light element (modulated) red LED
Light jection element (modulation): peak wavelength 650nm
Spot diameter is about 9mm (at a distance of 100mm)
Material shell: PBT (polyethylene terephthalate)
Lens: Polycarbonate
Display cover: polycarbonate
